CH701-Economy Type-Current Sensor IC-Motor Control

The CH701 current sensor IC is an economical and precise solution suitable for AC or DC current sensing in industrial, automotive, commercial, and communication systems. This small package is highly s

The CH701 current sensor IC is an economical and precise solution suitable for AC or DC current sensing in industrial, automotive, commercial, and communication systems. This small package is highly suitable for space constrained applications, while saving costs by reducing circuit board area. Typical applications include motor control, load detection and management, switch mode power supplies, and overcurrent fault protection.

58彩票The device consists of a precise, low offset, linear Hall sensor circuit with a copper conductive path located near the surface of the die. The external current flowing through the copper conduction path generates a magnetic field, which is induced by an integrated Hall IC and converted into a proportional voltage. A precise and proportional voltage is achieved through low offset, chopper stable BCD Hall IC, which is programmed for accuracy after packaging. When the increased current flows through the main steel conduction path (from pins 1 and 2 to pins 3 and 4), the output of the device has a positive slope, which is achieved using oaTH or current sensing. The internal anode of this product is 0.8m, with low power consumption.

The terminals of the conductive path are electrically isolated from the sensor leads (pins 5 to 8). This enables the CH701 current sensor IC to be used for high side current detection applications without the need for high side differential amplifiers or other expensive isolation technologies.

The CH701 is packaged in a small, low profile surface mount SOIC8 package. The lead frame is coated with 100% matte tin and compatible with standard lead-free printed circuit board assembly processes. Except for the flip chip high-temperature lead based solder balls, which are currently not subject to RoHS restrictions, this device is lead-free. The equipment has undergone comprehensive calibration before leaving the factory.

  • AEC-Q100

  • 58彩票0.8m Ω Strong ability to withstand impact current

  • Integrated shielding almost eliminates capacitive coupling from the current conductor to the die, greatly suppressing output noise caused by high dv/dt transients

  • Industry leading noise performance, greatly improving bandwidth through proprietary amplifier and filter design technology

  • 58彩票High bandwidth 120kHz analog output for faster response time in control applications

  • The filter pin allows users to filter the output at lower bandwidths to improve resolution

  • Integrated digital temperature compensation circuit allows for near closed-loop temperature accuracy in open-loop sensors

Vicorv High-Reliability Electronic Components


  • Small size, low profile SOIC8 package suitable for space constrained applications

  • Filter pins simplify bandwidth limitations and achieve better resolution at lower frequencies

  • Single power operation

  • The output voltage is proportional to the AC or DC current

  • 58彩票The sensitivity and static output voltage fine tuned by the factory have improved accuracy

  • The stability of the chopper results in a very stable static output voltage

  • Near zero hysteresis

  • 58彩票Output measured by the ratio of power supply voltage

    Vicorv High-Reliability Electronic Components